Futaba CA-RVIN-700 Extern spänningsingångskabel

Används med Futaba R7003SB, R7008SB och R7018SB-mottagare. Denna kabel kan användas för att till exempel mäta dragbatteriets spänning. Spänningen vid sändaren visas under "EXT-VOLT".

Kabellängd 700mm.

Futaba CA-RVIN-700 External Voltage input cable

Name: Futaba CA-RVIN-700 External Voltage input cable
Brand: Futaba
SKU: FPEBB0141

SKU: FPEBB0141

22,00 €

Antal

This is the Futaba CA-RVIN-700 External Voltage Input Cable.
Används för att ansluta en Futaba Telemetry-mottagare till en extra spänningsport.
Cable, Fuse, Heat Shrink Tube and Instructions
Längd: 700 mm
This voltage cable plugs into the R7008SB next to the antenna.

This measures the external voltage, such as the battery that is running a motor. The voltage will be displayed in the transmitter as "EXT-VOLT".

Maximum voltage is 70 volts.

Cable should be cut to desired length, then remove & save 30mm from the positive black line. Next, solder the fuse inline on the positive wire and reattach the section of wire that was previously removed and solder into place. The fuse should be attached as close to the external power supply as possible. Place shrink tubing over the fuse and cover all sodered areas. Shrink the tubing onto the wire with a heat gun. The cables will then be connected to corresponding + & - wires that connect the ESC to the battery and attached using solder and shrink tubing.

Inga omdömen änBerätta vad du tycker. Var den första som lämnar ett omdöme.

Futaba CA-RVIN-700 External Voltage input cable

Info

Funktioner:

Ingår:

Specifikationer:

Kommentarer:

Liknande produkter