Futaba T6K-V3S T-FHSS lähetin setti jossa R3008SB vastaanotin mukana.
T6K soveltuu hyvin aloittelevalle lennättäjälle tai kokeneelle viikonloppu lennättäjälle.
Monipuolinen Futaban lähetin joka on päivitetty 8 kanavaiseksi.
Tukee S.Bus ja S.Bus2 ja lähettimessä 30-mallin muisti.
Ominaisuuksina mm. Telemetria, audio out. Valmiit mallit liidokeille sekä Quad koptereille.
Käyttöohjeen löydät tästä
Sis. paristokotelo 4x AA paristolle.
Optiona Li-Fe 6,6V 1700-2100mAh tai 5kennoinen NiMH akku
Esittelyvideon löydät tästä
Updated Version 3 offers 8 channels of control!
To get the most radio for your money, check out the new 6K — an easy-to-program flight system with versatile functions that include telemetry, S.Bus/S.Bus2 compatibility and 30 model memory. With Version 3 updates, it's now a better value than ever. The NEW 6K is an 8-channel system with additional telemetry functions, expanded multicopter flight modes and much more.
New in the T6K Version 3:- Two additional channels
- Flight condition´s
- AIL DIFF
- Timer 2
- AIL to RUD MIX
- Channels 7/8 are used through the R3008SB receiver's S.BUS/S.BUS2 ports
- Allow for expansions or adding accessories
- Can be assigned to any of the four switches or VR dial
- Are included in Sub Trims, End Points, Reverse, Failsafe, Servo Monitor and Trainer
- Expanded Flight Modes (Fly Mod) in multicopter programming
- Priority — toggle through five different values assigned to flight modes on an assigned channel
- Matrix — up to nine combinations using two, 3-position switches for controlling gimbals
- Vibration alerts with timer functions and Throttle Integrate
- SBS-01C current sensor and SBS-01V voltage sensor compatibleThe included R3008SB receiver has six standard PWM ports plus S.Bus and S.Bus2 ports. You can use S.Bus as the main link to your servos or a combination of the ports. The S.Bus2 port allows bi-directional communication with T-FHSS Futaba air transmitters and the use of a wide array of telemetry sensors.
- Airplane, Helicopter, Glider and Multicopter programming
- S-FHSS/T-FHSS selectable
- Telemetry system (T-FHSS) with data speech (via earphones) function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer, current, capacity and voltage
- Built-in antenna (Full Range)
- S.Bus/S.Bus2 servo setting functions programmable through the transmitter
- Preset vibration alarms
- 30 model memory
- 8-character model/user naming
- Programmable mixes (3-normal, 1-curve) for airplanes, helicopters, gliders and multi-rotors
- Digital trims with variable step settings
- Adjustable stick length and tension
- Changeable switch/VR position and AUX channel function
- Throttle position warning
- Backlit 128x64 DOT LCD screen with adjustable display contrast
- Software updateable through the CIU-2 or CIU-3 interface units
- Screen Lock
- Earphone/S.Bus/Trainer jacks
- Assignable switches (three 3-position, one 2-position)
- Range Check
- Program navigation bay with jog dial, +/- pads and end pad
- Data reset
- Model copy
- Selectable model type
- Fail Safe
- End Points
- Trim/Trim Resets/Trim Steps
- Sub Trim
- Servo Reversing
- Parameter functions
- Servo monitor/Test
- Wireless model data transfer (to other T6K transmitters)
- Timer-System and Model (Up/Down/Down-Stop/THR Integrate) w/Vibration Alert
- Trainer system
- Power Saver
- Wing Type (5-wing, 2-tail)
- Throttle Cut
- Dual Rate/Expo
- Throttle Curve
- Idle down
- Gyro
- Aileron differential
- V-Tail
- Camber
- Air Brake
- Elevator-to-Flap mixing
- Flap-to-Elevator mixing
- Elevon mixing
- Wing Type (5-Wing, 2-Tail)
- Condition select
- Dual Rate/Expo
- Motor switch
- Gyro
- Aileron Differential
- V-tail
- Butterfly mixing
- Trim mixing
- Elevator-to-Camber mixing
- Camber mixing
- Aileron-to-Camber mixing
- Swash type (6)
- Condition Select
- Throttle Cut
- Dual Rate/Expo
- Trim Offset
- Delay
- Gyro mixing
- Swash AFR
- Swash mixing
- Throttle Curve (5-point)
- Pitch Curve (5-point)
- Pitch-to-Rudder mixing
- Throttle Hold
- Hovering throttle
- Hovering pitch
- Flight Mode
- Center alarm
- Dual Rate/Expo
- Throttle Curve
- Throttle Delay
- Gyro
- English
- German
- French
- Spanish
- Italian
- Dutch
- Temperature sensor (loop): SBS-01T
- Temperature sensor (EP models): SBS-01TE
- Altitude sensor: SBS-01A
- RPM sensor magnet type: SBS-01RM
- RPM sensor optical type: SBS-01RO
- RPM sensor brushless motor type: SBS-01RB
- (Additionally the SBS-01V telemetry sensor for external voltage can be used together with the optional R3008SB receiver)
- Type: 2-stick, T-FHSS/S-FHSS selectable
- Channels: 8 (channels 7/8 are used through the receiver S.BUS/S.BUS2 port)
- Power Supply: 4 "AA" cells; optional 6V NiMH or 6.6V LiFe batteries
- T-FHSS Air: R3006SB & R3008SB (Note, the R304SB, R304SB-E T-FHSS surface system receivers does not work with the T6K or T6K-V2)
- S-FHSS: R2008SB, R2006GS & R2106GF (No telemetry functions)
The included R3008SB T-FHSS Air Receiver is S.BUS compatible and features Dual-Antenna Diversity - it also comes equipped to handle high voltage applications.
- T-FHSS Air 2.4G system
- Dual antenna diversity
- S.BUS, S.BUS2 system
- Power Requirement: 4.8 - 7.4V Batteries
- Battery F/S Voltage: It's set-up with the transmitter
- Size: 43.1 x 25 x 8.8 mm
- Weight: 8.5 g
