top of page
Hitec HSB-9360TH

Hitec HSB-9360TH

SKU: 116360
195,00 €Pris

Multiplex Hitec HSB-9360TH servo 

Premium tason 20mm servo titaani vaihteistolla.

Huippunopealla HSB-9460TH-servolla on sensaatiomainen virransäästötekniikka - jopa 90% vähemmän energiankulutusta!

 

Erityisten suuritehoisten moottoreidensa ja hiljattain kehitetyn "Power Miser" -elektroniikan ansiosta tämä harjaton servo, jossa on täysi titaanivaihteisto, tuottaa parhaat arvot kussakin tapauksessa.

Verrattuna kaikkiin muihin markkinoilla oleviin harjattomiin servoihin HITEC-harjattomilla servoilla on se etu, että niillä on huomattavasti pienempi tehontarve samalla suorituskyvyllä. Tämä saavutetaan syöttämällä takaisin servoa (generaattoriperiaatetta) jarruttaessa syntyvä energia käyttöakkuun. Tätä huipputeknologiaa tarjoaa yksinomaan HiTEC.

 

Toinen hieno ominaisuus on hidas lähestyminen neutraaliin asentoon käyttöönoton jälkeen.

Suurissa malleissa olevat ohjainpinnat ja niiden rakenteet säästyvät ja malli valmistautuu käyttöön rauhassa, ei enää nykimistä käynnistettäessä!

 

Ominaisuudet:
• Ohjelmoitava
• Harjaton moottori
• Suuri paikannusnopeus
• Suuri käyttövoima
• Suuri pitovoima
• Titaaniset vaihteet
• 2 kuulalaakeria
• Osittainen alumiinikotelo
• 25 hammastus servotorvelle

 

Tekniset tiedot:

Leveys: 20mm

Korkeus: 38mm

Pituus: 40mm

Paino: 68g

Käyttöjänniste: 4.8 - 8.4V

Nopeus s/60° @4.8V: 0.1

Nopeus s/60° @6.0V: 0.08

Nopeus s/60° @7.4V: 0.06

Voima 17kg

Hammastus: 25T

 

Antal
  • Info

    Ultra premium brushless servo of the 20 mm class

    The ultra-fast HSB-9460SH servo has a sensational power-saving technology - up to 90% less energy consumption!

    Thanks to its special high-performance motors and newly developed "Power Miser" electronics, this brushless servo with a full titanium gearbox delivers the best values ​​in each case.
    Compared to all other brushless servos available on the market, the HITEC brushless servos have the advantage that they have a significantly lower power requirement with the same performance. This is achieved by feeding back the energy generated when braking the servo (generator principle) into your drive battery. This cutting-edge technology is offered exclusively by HiTEC.

    Another nice gimmick is the slow approach to the neutral position after commissioning.
    Oars and their mechanisms in large models are spared and the model gets ready for use in peace, no more twitching when switching on!

  • PAD

    If you use a battery backer or a BEC voltage from your speed controller, the PAD (Power Absorbing Device) included with every servo can simply be plugged in parallel to the servo. This prevents the backflow of current in the case of incompatible ENERGY EFFICIENT connections. This makes the servos behave like any other known servo.
    Further details can be found in the operating instructions.

  • Features:

    Programmable
    • Brushless motor
    • High positioning speed
    • High positioning force
    • High holding force
    • Titanium gear
    • 2 ball bearings
    • Part-aluminum housing
    • 25 toothing for servo horn

  • Technical Specifications:

    Width : 20 mm
    Height : 38 mm
    Length : 40 mm
    Weight : 0.068 kg
    Servo type: Standard
    Special features: Wide-Voltage-Digital Motor
    type Servos: brushless
    gear: Titan
    Operating voltage in V: 4.8-8.4 V
    Positioning time s / 60 ° at 4.8 volts: 0.1
    actuating time s / 60 ° at 6.0 volts: 0.08
    actuating time s / 60 ° at 7.4 volts: 0.06
    torque in kgcm at 4.8 volts: 17
    torque in kgcm at 6.0 Volts: 17
    torque in kgcm at 7.4 volts: 17
    toothing: 25T
    Ball bearings: Yes
    Waterproof: No
    Brief description Servo: Power
    saver Flight recommendation: Yes Helicopter
    recommendation: Yes
    Car recommendation: Yes
    Boat recommendation: Yes

Inga omdömen änBerätta vad du tycker. Var den första som lämnar ett omdöme.

Liknande produkter

bottom of page