JP EDF 120mm puhallin ja 10S 840Kv moottori

Name: JP EDF 120mm puhallin ja 10S 840Kv moottori
Brand: JPHobby
SKU: JPH-12012-10SCCW

SKU: JPH-12012-10SCCW

610,00 €

Antal

Toimitusaika noin 1-4 viikkoa

JP EDF 120mm 12-lapainen puhallin ja 10S 840Kv moottori

Puhallin valmistettu kokonaan alumiinista.

Tehtaalla valmiiksi tasapainoitettu.

Teho:

10S (37.0V): 112A, 5.4kg, 3763W

10S (42.0V): 96A, 6.1kg, 4838W

10S (43.5V): 118A, 7.4kg, 5947W

Pituus ilman moottoria: 80mm

Paino moottorilla: 620g

Ulkomitta: 123mm

Sisämitta: 120mm

Roottori: 12-lapa, 120mm

Stators: 8

EDF Ducted Fan JP Hobby 120mm + 10s Motor 840KV (CCW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 10s.

Description

Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	10s (37.0v)	10s (42.0v)	10s (43.5v)
Thrust:	5.4 kg	6.1 kg	7.4 kg
Current:	112 A	96 A	118 A
Power:	3763 W	4838 W	5947 W
Recommended ESC:	150 A / HV	150 A / HV	150A / HV
Min. recommended liPo:	5000mAh 40C	5000mAh 40C	6000mAh 40C

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.The controller should be chosen 20% over rated due to the long lasting load. LV = low voltage controler up to 6s, HV = high voltage controler above 6s. Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Specifications

Special high grade aluminum quality
Motor Kv: 840
Motor: MT-4250-12S (8mm axle) Outrunner 12 poles
Motor diameter: 50mm
Motor length: 60mm
Rotor: 120mm 12 blades aluminium
External diameter: 123mm
Internal diameter: 120mm
Inlet ring diameter: 136mm (removable)
Ejection diameter: 120 mm
Combo max thrust: 7.4Kg
Weight: 620g (combo EDF + lip + motor )
Max efficiency: 90 %
Recommended max. rotation speed: 75600 tours/min
Speed Control Advanced Timing Setting: 15° and under
Connections: Banana / PK 5mm (in place)

Content

1x JP Hobby 10s 120mm full metal EDF unit (CCW)
Connectors 6mm

Inga omdömen änBerätta vad du tycker. Var den första som lämnar ett omdöme.

JP EDF 120mm puhallin ja 10S 840Kv moottori

Info

Liknande produkter