Skywalker 80A nopeudensäädin 3-6S V2
Luotettava ja laadukas
Ohjelmoitavissa ohjelmointikortilla
Jatkuva virta: 80A hetkellisesti 100A
Kennomäärä: 3-6S LiPo
BEC: Lineaari 5V 7A
Ei sisällä liittimiä
Mitat: 85x36x9mm
Paino: 79g
Käyttöohje ENG
High Quality & Reliability
Good quality comoponents guarantees the high quality and reliability of SkyWalker series of aircraft ESCs.- ESC which features a high performance 32-bit microprocessor (with a running frequency of up to 96MHz) is compatible with various brushless motors.
- DEO (Driving Efficiency Optimization) Technology greatly improves throttle response & driving efficiency and reduces ESC temperature.
- Separate programming cable for connecting ESC to a LED program box and allows users to program the ESC anytime, anywhere. (For detailed info, please refer to the user manual of the HOBBYWING LED program box.)
- Normal/Reverse brake modes (esp. reverse brake mode) can effectively shorten the landing distance for the aircraft.
- Search mode can help users find the aircraft by the alarm beeps after the aircraft falls into the complex environment.
- Multiple protection features like start-up, ESC thermal, capacitor thermal, over-current, over-load, abnormal input voltage and throttle signal loss effectively prolong the service life of the ESC.
- Flexibility During flight
- Lower ESC temperatures
- Longer flight time
The DEO technology (Driving Efficiency Optimization) implemented in the ESC has multiple advantages. Fast and smooth throttle response, better stability and flexibility during flight. Higher driving efficiency, longer flight times. Lower ESC temperature, more reliable operation.
With Reverse Brake and Linear Reverse Brakes mode enabled can effectively shorten the landing distance of the aircraft to simulate the landing of a real aircraft. Normal Brake Mode and Brake Disabled mode are also available; the brake amount is adjustable in normal brake mode.
(This is HOBBYWING's registered patented)Search mode can help users find their aircraft by pulsing the motor to beep after the aircraft falls into a visually obstructed environment and is difficult to find. This mode can also be used to prompt the user to disconnect the battery of an ESC that has not been working for a set time to prevent the battery from running out of power and being damaged.
- Type: Brushless ESC for airplanes
- Cont./Peak Current: 80A/100A
- Input: 3-6S LiPo
- BEC: Switch Mode: 5V/7A
- Input Wires: 12AWG-150mm
- Output Wires: 14AWG-100mm
- Input Connector: No
- Output Connectors: 4mm Gold Connectors (Female)
- Size: 85x36x9mm
- Weight: 79g
- Firmware Upgrade: Not Supported
